>> CLICK THE "REQUEST INFORMATION" BUTTON in the listing, or add your enquiries to a list, click the "ENQUIRY LIST" link above, send us your enquiries by clicking "SUBMIT ENQUIRY". Alternatively email us at sales@drillcentral.com.au or phone (07) 3337 9720.
We have multipurpose drill rigs and rotary drill rigs for sale. (All prices are in AUD and exclude GST).
>> VIEW MAP OF SPECIFIC LOCATIONS
Drill Rigs
Sort By:
SORRY I'M SOLD
2007 Model with less than 3900 Hours. Including: • Side Entry Swivel, Hammer Table and 19m of 1m Mayhew Jnr Hammer Rod.. More Info
SOLD
SORRY I'M SOLD
Specs/Capabilities:• Diesel Engine 112kw• Rotary Drive Torque 5500Nm• Pullout Capacity 8000Kg• Main Winch 2000Kg• Second.. More Info
$150,000
SORRY I'M SOLD
• Has on board air with a Sullair 900cfm 350 psi compressor mounted on the deck• Truck is a 1983 MAN twin steer with 128.. More Info
$220,000
Trailer Mounted Bournedrill 2000R1985 Rotary Table Rig Mack 6 cylinder engine• Fully modified in 2010 to Hydraulics to .. More Info
$484,000
JUST REDUCED!
• Truck in very good condition • Powered by a Cummins L10 • Road Ranger gearbox and Spicer Hardy 601 transfer case • R.. More Info
$120,000
SORRY I'M SOLD
• November 2013 Fuso Canter 4 x 4 MWB Std Cab 6500kg GVM 5 spd 3.0 litre Turbo Charged.• Factory Warranty until 2020• A.. More Info
SOLD
JUST REDUCED!
DRILL RIG:• CE180• 1200 hours on the clock with regular servicing• 900 mm wide• 2.85 m high when operating• 1.5 Ton pul.. More Info
$136,500
JUST LISTED!
- Brand new Head fitted in 2018- Engine Reconditioned less then 1400 hours ago- New Hydraulic Pump fitted August 2019- .. More Info
$106,000
SORRY I'M SOLD
• Manufactured in 2003• Ex NSW Rail Geotechnical Rig• Complete Reconditioning in 2013• 3m stroke• Main winch• Wireline W.. More Info
$80,000
SORRY I'M SOLD
• Jack Up sub base• Cummins Engine• Main and Wireline winches• Capable 1700 metres HQ .. More Info
$189,000
JUST LISTED!
Current hours – 1,197.0 (10/2020) • Rig has been professionally fitted with a Toa-Tone SP8000 Sonic drill head mounted o.. More Info
$400,000
.. More Info
Last of the DP’s, electric over hydraulic controls, Sealed Air Con Cab, has TIM 2300 hole alignment, good reliable Drill.. More Info
$130,000
Last of the DP’s, electric over hydraulic controls, Sealed Air Con Cab, has TIM 2300 hole alignment, good reliable Drill.. More Info
$120,000
Sandvik DP1500 chain Drive Drill - 2009, that would either be suitable for parts or a rebuild
(Product Code: 74162)
Engine is U/S, also the drifter is missing... More Info
$29,000
• Well maintained• Valve set done every 2000 hours.• Serviced every 250 hours• Everything works and functions as it shou.. More Info
$175,000
Track Frames removed and are stripped, no rollers or tracks they are included in sale, compressor also missing, drifter .. More Info
$55,000
JUST LISTED!
SORRY I'M SOLD
• NSW rego 13/11/2020• Dump mast• Dual hyd. Bean pumps• 900 x 350 Sulair compressor• Sand blasted and pai.. More Info
$338,500
• Medium weight multi purpose exploration rig• Rig engine is a Cummins which runs great• Bean Pump, dump mast, hydraulic.. More Info
$107,000
JUST LISTED!
- Purchased 2011, full history available. - Approx. 2000 hrs. Drive/Engine - 4-cylinders DEUTZ diesel engine, Typ - TCD2.. More Info
$409,500
Set up for air/mud. Mostly drilling 3” earth holes but has done up to 10” hammer.DRILL• 100hp engine• 3m stroke• Hollow .. More Info
$POA
Includes:• Assorted duckbill bits / rock bits• Assorted Reamers• Pulling eyes and swivels• Transmitter housings• Digi Tr.. More Info
$42,800
SORRY I'M SOLD
• Showing 4051 hours• Engine Cummins 6BTA59C• Mounted on a 2007 Volvo 8 wheeler truck automatic transmissionThe rig feat.. More Info
$309,000
2008 Sandvik 840 Drill Rig, powered by a Cummins 6CTA 8.3
(Product Code: 97737)
Location: Queensland
SORRY I'M SOLD
RIG: 2008 Sandvik 840 powered by a Cummins 6CTA 8.3RIG CARRIER: 2008 Mercedes 4144 ACTROSRig features:• BHP Compliant• F.. More Info
$765,000
SORRY I'M SOLD
RIG:• Hydraulic rod bin• 1.2 metre dump• Roto screw pump• High pressure pump• Adjustable controls• Haul Winch• Wireline .. More Info
$230,000
SORRY I'M SOLD
• Current hrs - 2079.5• Modified to run Odex system with cutting divertor• Rod Manipulator• Hydraulic rod bin holds 90 m.. More Info
SOLD
2012 EVH 2100R Drill Rig for sale on a 2009 V8 Land cruiser 6x6
(Product Code: 70513)
Location: Western Australia
SORRY I'M SOLD
• Not lazy Axel - 80000 Kms • 55 HP Perkins Deck Mounted (2000hrs) 2.1 mtr Stroke• 4.5 Tonne Pullback • 4 jacking Legs .. More Info
SOLD
SORRY I'M SOLD
10,000 Explorer Mk10On late model Isuzu 4x4 with cross lock, 2 rear view cameras,( 30,000km)6 meter strokeMain W.. More Info
$POA
SORRY I'M SOLD
Truck mountable with large 5x6 American mud pump for Rotary Mud drilling & FMC Bean pump for diamond core drilling. .. More Info
SOLD
Atlas Copco/Schramm track mounted rig Fully refurbished – Custom Built
(Product Code: 88170)
Location: NSW
• New Elgi 1100 x 350 Air Compressor ZERO hours• Schramm mast with carousel• Reconditioned Isuzu hydraulic pump motor• .. More Info
$257,500 ONO
SORRY I'M SOLD
• Jack Up Base• 153 KW Cat Motor• Wireline and 8T Main Winch• Mast extension• Hours – 3400• Condition Fair.. More Info
• Cat C11• Man 2008 8x8 TGA• Rig hrs 13539• Truck klm 44958• Good condition all round all service • History available• 1.. More Info
$707,000
Hydraulic chuck, Aluminium mask. Heli transportable. 250m NQ Just Rig - $32,100.. More Info
Rig & truck $39,500
SORRY I'M SOLD
• 4500 hrs• Service history Capabilities HQ: 500 MetresOpen Hole: 350 MetresPull Back: 10,500kgMass: 11,500kg Safet.. More Info
$197,500
DE710 – 147 -08 for sale mounted on Kenworth Truck
(Product Code: 77915)
Location: Eastern Australia
11,000 hours on drill.Very sound machine and has been well maintained, service history available at request, all the HYD.. More Info
$257,500
SORRY I'M SOLD
Drive Engine – Electronic Perkins Turbo Diesel ‘1106’ series, 228hp @ 2100rpm Rig Hours – 864 with service schedule h.. More Info
$199,500
SORRY I'M SOLD
Delivered 2011 with B-H Rotation Head and Deep Hole feed cylinder giving 89kN of feed force and pullback. 1000V Power Un.. More Info
$192,400
SORRY I'M SOLD
• Fully stocked rod box (approx 40m)• New hoses• Boring head & assorted subs• 16Q hydraulic power pack• 74 hours.. More Info
$4,600
- KTA19 600hp engine - 350/900 comp Upgrades that have been made: • New Hydraulic motors • New Traverse Cylinders • New .. More Info
$260,000
• Under 1700 hours. • Manufactured in 2015. • 45 ton pull back • Rod loader • Automatic rod stacker • 2 x AMC on board m.. More Info
$POA
JUST REDUCED!
Drill Package - Midway 10M PLUS Compressor Truck & Compressor
(Product Code: 05106)
Location: Eastern Australia
SORRY I'M SOLD
Midway 10M Drill Rig mounted on 2002 FM420 Volvo Truck • Fully rebuilt mid 2012 from the ground up including pump.. More Info
$POA
• Atkinson Tri-drive twin steer 6VT 92 Detroit• 6VT92 Detroit – Rig motor• 700 x 300 Atlas Copco Compressor on d.. More Info
$190,000 Negotiable
• 8x8 Oshkosh mobility• 18 tone pull back• 45* dump• 160 meter rod rack• 350/1070 IR compressor 350 hours• Bean pump• Sl.. More Info
$453,000
Edson RP70 with a Hatz diesel mounted on a 6x6 Toyota 1991 multi drive conversion
(Product Code: 97745)
.. More Info
$69,950
SORRY I'M SOLD
EVH 2100R Drill Rig164.3 hoursTruck1989 Isuzu 4x4 FTS 700337,000 kms2 way radioFlashing lightSpotlightsAir conditioner w.. More Info
$69,000
SORRY I'M SOLD
Drill Rig, Evolution 3000FH, mounted on Mercedes Benz 4144 with only 3955 kilometres. This rig would suit new buyer.Evol.. More Info
$1,200,000
SORRY I'M SOLD
Drill Rig G&K1000 Truck Mounted • Truck – Kenworth T440 6x4 YOM - 1994. Road Worthy due July 2015 • Rig - 1997 G.. More Info
$178,000 negotiable
• Mack R600 6 X 4• Mack engine and transmission• 1000 retractable table• Water injection pump• Manual clutches• Hydrau.. More Info
$53,500 negotiable
Gardner Denver 2500DD Drill Rig Range 3 capable Each rig completely overhauled Drawworks rebuilt 17-1/2" Rotary t.. More Info
$POA
SORRY I'M SOLD
Gemco 210B Drill Rig Suitable for Geotechnical & Environmental drilling - Air and DTH capable as well as Mud Rotary,.. More Info
$62,000
SORRY I'M SOLD
• Approx 4000 hours since new• 2012 to Current service history• Rig Manual• Ready to work, no or minimal hydraulic leaks.. More Info
$120,000
SORRY I'M SOLD
• Main winch, wireline, 2 x auxillary winches• Auto SPT• FX25 Hammer (push tube driving attachment)• About 1500 hours•.. More Info
SOLD
SORRY I'M SOLD
• Current Hour Meter Reading – 1,522 hours• Doosan 6 cylinder turbo diesel (Electronic Control) 260hp @ 2,500rpm.. More Info
$POA
• Including ancillary high volume twin grout colloidal mixing bowls• Plus heavy duty augers 600 & 450 diameter• Unit.. More Info
$360,000
• Recent hammer and hydraulic pumps rebuild • Engine has 13,500 hrs on it and had a rebuild at 7,000 hrs.Drill Rig is .. More Info
$91,000
SORRY I'M SOLD
• 4 cyl dutz motor• 3 pullmaster winches• 4 jack up legs• Silvan hydraulic driven water pump• New 6.5m steel mast• Worki.. More Info
SOLD
• Mounted on a 1988 MAN 6x6 truck• Brand new Cummins 6BTA Motor Capacity:- HQ to 550 meters- NQ to 800 meters- BQ to 100.. More Info
$189,000
Main engine is a Perkins with 1098hrsAll level jacks (4) have been overhauled as well as the raise cylinder, tramming hy.. More Info
$185,000
NEW / UNUSED
Rig engine: Manufacturer KUBOTA Type V2203 Output (HP) & Rated (RPM) 46 & 2,800 Pull back capacity (Kg) 2.. More Info
$99,000
2007 Maxdrill Hydraulic top drive Powered by Cummins 270 HP Auto Rod loader 30 Rod bin. Elgi 900/350 Compressor Cum.. More Info
$320,000
SORRY I'M SOLD
• Mack Engine and transmission• 1250 Draw works• 6 inch Brakes• Air Clutches• 2000 Table• 3 3/4 Kelly• 5 X 6 GD .. More Info
SOLD
SORRY I'M SOLD
• Air Clutches• 2000 Retractable table• 5 X 6 GD Mud pump• 4 cylinder Bean injection pump• Rod Box .. More Info
$54,000 negotiable
Mayhew 1000 Table Drive drill rig mounted on Freightliner with Spicer 10spd box
(Product Code: 20622)
• Retractable table• 5 x 6 Gardner Denver mud pump• Hydraulic pulldowns.. More Info
$85,000
SORRY I'M SOLD
• 5 winches, main winch needs repairs• Can hang 45 metres, mast has been extended for that reason• Stroke 6 metres• 2 .. More Info
SORRY I'M SOLD
Mercedes Benz Truck: Model 3228; V8 Diesel; Atlas Copco 750/300 compressor.. More Info
SOLD
P160 Pioneer Drill rig on a International Truck with Sullair compressor 750x250
(Product Code: 11642)
• Dump mast*Sullair Compressor can be separated.. More Info
$96,500
JUST LISTED!
SORRY I'M SOLD
• Carrier: ‘Road registered’ compact Isuzu FTS 700 4X4 truck• Compressor: Onboard 425 CFM Sullair compressor with a Jo.. More Info
$75,000
SORRY I'M SOLD
RIG and TRUCK• Drills to 90m RC• 3’’ Remet Rods- Unused 120m, plus bundle of new inner tubes.• 3 1/2’’ new RC Hammer ,.. More Info
$POA
• 6500 hrs• Drill has 40000 lbs pull down• Fitted with C18 Cat engine(2000hrs)• Sullair 1100cfm @ 350psi compressor • 4 .. More Info
$189,000
Aircore 3’’ and RC 3 1/2” Mounted on a Tatra 6x6 year 2000 040178 kmRIG is powered by a Cummings LTA 10 Big Cam 9533 hrs.. More Info
$385,000
SANDVIK DE130 (Onram 1000/2) - Underground Drill Rig
(Product Code: 23432)
Location: Western Australia
SORRY I'M SOLD
SANDVIK DE130 (Onram 1000/2) - Underground Drill Rig • Underground Drill Rig complete with dual voltage power pack and .. More Info
$POA
• Well maintained• Valve set done every 2000 hours.• Serviced every 250 hours• Everything works and functions as it shou.. More Info
$175,000
• Well maintained• Valve set done every 2000 hours.• Serviced every 250 hours• Everything works and functions as it shou.. More Info
$240,000
SORRY I'M SOLD
Drill Rig Schramm T130XD Detroit diesel rig engine, Tele mast with 50' travell, 20" opening in table, with Loadsafe rod.. More Info
$POA
• Total rebuilt 2008, Drill head was rebuilt, funk box rebuild• Mounted on Man 8x4 1980, 86, 000km• Set up for RC drill.. More Info
$485,000
• Mounted on a Volvo FL10 8x4, 1992, 74,000KM• Hydraulic powered by Air Cooled VM Diesel 170hp 7,500 hrs• Dump mas.. More Info
$285,000
Drill Head1) Type: Hydraulic motor driven/manual On/Off2) Rotational motion: Normal/reverse rotationVibrating rotation.. More Info
$210,000
• Small Footprint rig•Track mounted - Tracks 480mm wide•Cummins B Series 6 Cylinder 5.9L•Hydraulic chuck driven .. More Info
$198,000
SORRY I'M SOLD
•15,000 hrs total• New deck engine• New funk box• New Hydraulic pumps• Rig engine fitted with fire suppression• Mast rat.. More Info
$360,000
XY-2PC Core Drilling Rig with Deuitz diesel engine + rubber crawler + BW 150 pump, SPT Hammer and additional equipment
(Product Code: 56302)
Location: NSW
Rig• Mast has been fitted• Comes with Spares• Capable of drilling to 150mMud Pump• Horizontal, Triplex, Single acting re.. More Info
$29,500
SORRY I'M SOLD
• 155 hours excellent condition• Break out clamps• Large mud pump• New drill pipe in rack, 49 x 3m rods• New horizontal .. More Info
$49,200
DRILL PACKAGE DR34 - 2010 McCulloch DR950 AND ADDITIONAL EQUIPMENT
(Product Code: 81792)
Location: Eastern Australia
SORRY I'M SOLD
DRILL PACKAGE DR34 - 2010 McCulloch DR950 AND ADDITIONAL EQUIPMENT RIG: 2010 McCulloch DR950CARRIER: 2010 Mer.. More Info
$760,000
SORRY I'M SOLD
2011 KWL1600 mounted on 2006 Tatra 8x8 Multi-purpose exploration rig Rig Engine 4180 hours CAT C13 Truck Engi.. More Info
$POA
Showing 1 to 85 of 85 (1 Pages)